82 Using accessories Back to TOC
5 Slide the negative holder into the slide holder on the bottom side of
the XPA light source.
6 Place the XPA light source into the positioning plate with negatives
facing down and the HP logo facing you.
7 From the HP Precisionscan Pro software, click the Scan menu,
and select XPA (Negatives).
8 Before making changes, see "Making optional adjustments for
slides or negatives" on page 83.
9 When finished using the XPA light source, on the Scan menu, click
Scanner Glass. Disconnect the XPA light source if you want.
HP logo here
To Next Page
Loading...