To Next Page

To Previous Page

Step 2. Install the software

Caution If you are installing the software onto a Windows computer, do not

connect the USB cable to the computer yet. Install the scanning software

before connecting the USB cable. If you are installing the software into a

Macintosh computer, you can connect the USB cable either before or after

installing the software.

1. Insert the HP Photosmart CD that came with the scanner into the computer CD

drive.

For Windows installations: Wait for the installation dialog box to display. If the

installation dialog box does not display after a few moments, see Scanner

installation troubleshooting on page 12.

For Macintosh installations: Double-click on the CD icon that appears on the

desktop, and then double click on the HP Scanjet Scanner Install icon to start the

installation.

2. Click Install software to install the scanning software. Follow the onscreen

instructions to complete the scanning software installation.

Step 3. Connect the TMA cable

➔

Connect the TMA cable from the lid to the scanner base.

Setup and Support Guide

English

Questions and Answers:

Need help?

Do you have a question about the HP Scanjet G4010 and is the answer not in the manual?

HP Scanjet G4010 Specifications

General

Scanner Type	Flatbed
Scan Resolution	4800 x 9600 dpi
Color Depth	96-bit
Connectivity	USB 2.0
Grayscale Levels	256
Weight	4.3 kg
Maximum Optical Resolution	4800 dpi
Max Document Size	216 x 297 mm
Scan Speed (10 x 15 cm color photo to share/e-mail)	28 sec
Scan Speed (OCR A4 text page to Microsoft Word)	28 sec
Media Types	Paper (inkjet, photo), envelopes, cards (index, greeting), 3D objects
Compatibility	Windows XP