ENWW 7
RIPPING procedure is properly explained in detail below for both Onyx and Caldera:
Onyx
• Configure the Page Size and Placement Strategy.
• Select your printer from the RIP Queue and select the Change… button from the
upper right hand corner of the screen.
• Select the appropriate Media Group and Media type.
• Select a standard Page Size or custom page size from the Page Size drop-down
list box.
• Set Placement to Print Jobs Individually.
• Click the Setup button.
• Set Justification to Left.
• Ensure Print Gutters are not checked.
• All Offsets are set to 0; Offsets in this context will add white space to the job and
not utilize printer margins.
To Next Page
Loading...
