4. Insert the ink tube connector into the metal connector on the printer.
The position for each ink color is shown on a label below each ink box and next to the profiler docking
station. The white ink box has a split “Y” supply line that connects the box to two ink ports on the
printer (Light Cyan/White and Light Magenta/White).
5. Install the profiler in the corresponding docking station slot.
NOTE: Printing with white ink requires you to install the optional White Ink Upgrade Kit and then perform a
white ink conversion. See Order accessories on page 73 for ordering instructions.
ENWW Load inks 23
To Next Page
Loading...
