HP Slate 2

Audio Output Quality Frequency Response 20 Hz – 20 kHz
Signal to Noise Ratio >85 dB
Total Harmonic Distortion 0.01%
Noise Floor –110 dB
Play/Record Sampling
Rate (s)
8 kHz – 48kHz
DAC 16, 20 or 24-bit
ADC 16 or 20-bit
Power
HP 30W Smart AC Adapter Dimensions 5.00 x 1.97 x 1.1 in (9.3 x 4.0 x 2.8cm)
Weight 0.82 lb (370 g)
Input 100 to 240 VAC
Input Efficiency Avg 87% min at 115 VAC (Level V)
Input frequency range 50 to 60 Hz
Input AC current 2.4 A at 90 VAC, 1.2 A at 180 VAC
Output Output power 30W
DC output 19.0V
Hold-up time 5 msec at 115 VAC input
Output current limit <11A, Over voltage protection- 29V max
automatic shutdown
Connector 3 pin/grounded, mates with interchangeable cords
Environmental Design Operating temperature 32° to 104° F (0° to 40° C)
Non-operating (storage)
temperature
-4° to 149° F (-20° to 65° C)
Altitude 0 to 10,000 ft (0 to 3,048 m)
Humidity 20% to 80%
Storage Humidity 10% to 90%
EMI and Safety
Certifications
CE Mark - full compliance with LVD and EMC directives; Worldwide safety
standards - IEC60950, EN60950, UL60950, Class1, SELV; Agency approvals -
C-UL-US, NORDICS, DENAN, EN55022 Class B, FCC Class B, CISPR22 Class B,
CCC, NOM-1 NYCE
QuickSpecs
HP Slate 2 Tablet
Technical Specifications
DA - 14196 North America — Version 8 — June 25, 2012 Page 9