HP Sprocket 2-in-1 User Manual

13
Specication Description
Product numbers
2FB96A (white); 2FB97A (black); 2FB98A (red)
Dimensions and weight
• Dimensions: 77.42 x 122 x 28.9 mm (3.05 x 4.80 x 1.14 in)
• Weight: 0.191 kg (0.42 lb)
Connectivity
Bluetooth 4.2
Printer management
HP sprocket app
Power supply
Internal rechargeable battery
Two-cell 850 mAh Li-Polymer 7.4 V
Charge time
90-120 minutes
Power consumption
0.9 W (standby)
Average 15.91 W (based on rst print)
Maximum 34.49 W at 25° C (77° F)
Print technology
Thermal printing with a ZINK™ Zero Ink® printer
• Note: The HP Sprocket 2-in-1 does not use ink cartridges to print.
Supported paper
HP Sprocket Photo Paper—5.0 x 7.6 cm (2 x 3 in)
Borderless printing
Yes
Supported le types
.jpeg, .ti (iOS only), .gif, .bmp, and .png
• Note: If you send a non-supported le type, the print job does not print.
Paper tray capacity
Up to 10 pages with the Smartsheet®
Memory Card Compatibility
micro-SD card, up to 256 GB
Print quality
313 x 400 dots per inch (dpi)
Mobile connectivity
• Supported by Android™ devices using OS v4.4 and above
• Compatible with iPhone 7 Plus, iPhone 7, iPhone SE, iPhone 6s Plus, iPhone 6s,
iPhone 6 Plus, iPhone 6, iPhone 5s, iPhone 5c, iPhone 5, iPod touch (6th generation),
iPad Pro (10.5-inch), iPad Pro (9.7-inch), iPad Pro (12.9-inch) 2nd generation, iPad
Pro (12.9-inch) 1st generation, iPad Air 2, iPad Air, iPad (5th generation), iPad (4th
generation), iPad mini 2, iPad mini 3, iPad mini 4.
Control panel
Power Switch; Shutter Release Button; Timer Button; Reset Button;
Charge and Status Indicator LED Lights
Environmental parameters
• Operating humidity: 5% to 70% RH (recommended)
• Non-operating humidity: 5% to 90% RH
• Operating temperature: 5° to 40° C (41° to 104° F)
• Recommended operating temperature: 15° to 32° C (59° to 90° F)
• Storage temperature: -30° to 70° C (-22° to 158° F)
Warranty
One-year limited hardware warranty
Visit hpsprocket.com/start for more information.
Regulatory Model Number
For regulatory identication purposes, your product is assigned a
Regulatory Model Number. The Regulatory Model Number for your
product is VCVRA-1714.
• Note: This regulatory number should not be confused with the marketing name (HP
Sprocket 2-in-1 Printer) or product numbers (2FB96A, 2FB97A, 2FB98A, etc.).
Camera Resolution
5 MP
For regulatory and safety notices, refer to the included sheet in your product packaging.
Battery Safety
• Do not disassemble the product or battery or short the battery terminals.
• Avoid contact with a leaking or damaged battery.
• Adult supervision is recommended when the product is being used by young children.
• Do not disassemble, strike, press, or put in a re.
• Do not use the printer if the product battery is swelling and causing product expansion.
• Keep the device clear of high temperatures and moisture.
Safety Information
Specications

HP Sprocket 2-in-1 Specifications

General

Print Resolution	313 x 400 dpi
Paper Size	2 x 3 inches
Camera Resolution	5 MP
Print Technology	ZINK (Zero Ink)
Battery	Built-in rechargeable Lithium-ion
Weight	0.4 lbs
Functions	Print
Mobile Printing Capability	Yes, through HP Sprocket App
Compatibility	iOS, Android