HP Sprocket 2-in-1 User Manual

15
Can I print to more than one printer?
Yes. You can connect and print to more than one printer, but you cannot connect to multiple printers at the same time.
How do I attach a lanyard to my printer?
Attach the lanyard to your printer to secure the printer to your wrist, carabiner, etc.
1. With the lanyard in one hand, hold the HP Sprocket 2-in-1 in the other hand, with the camera lens facing upwards.
2. Thread the small, narrow end of the lanyard loop through the top hole in the device until it emerges through the bottom
hole. Thread the opposite end of the lanyard through the small end that emerged from the printer.
3. Tighten the lanyard by pulling the opposite end.

HP Sprocket 2-in-1 Specifications

General

Print Resolution	313 x 400 dpi
Paper Size	2 x 3 inches
Camera Resolution	5 MP
Print Technology	ZINK (Zero Ink)
Battery	Built-in rechargeable Lithium-ion
Weight	0.4 lbs
Functions	Print
Mobile Printing Capability	Yes, through HP Sprocket App
Compatibility	iOS, Android