11
Specication Description
Product numbers
X7N07A (white)
X7N08A (black)
Dimensions and weight
• Dimensions: 116 x 75 x 23 mm (4.53 x 2.95 x 0.87 in)
• Weight: 0.172 kg (0.379 lb)
Connectivity
Bluetooth 3.0
Passive near eld communication (NFC)
Printer management
HP sprocket app
Power supply
Internal rechargeable battery
Two-cell 500 mAh Li-Polymer 7.4 V
Charge time
Up to 90 minutes
Power consumption
0.9 W (standby)
Average 15.91 W (based on rst print)
Maximum 34.49 W at 25° C (77° F)
Print technology
Thermal printing with a ZINK® Zero Ink® printer
• Note: The HP Sprocket Photo Printer does not use ink cartridges to print.
Supported paper
HP ZINK® Sticky-Backed Photo Paper
5.0 x 7.6 cm (2 x 3 in)
Borderless printing
Yes
Supported le types
.jpeg, .ti (iOS only), .gif, .bmp, and .png
• Note: If you send a non-supported le type, the print job does not print.
Paper tray capacity
Up to 10 pages with the Smartsheet®
Memory
Up to 512 MB
Print quality
313 x 400 dots per inch (dpi)
Mobile operating systems
Android™ v4.4 and above
iOS v8.0 and later
Control panel
Power button
Reset button
Charge and status light indicators
Environmental parameters
• Operating humidity: 5% to 70% RH (recommended)
• Non-operating humidity: 5% to 90% RH
• Operating temperature: 5° to 40° C (41° to 104° F)
• Recommended operating temperature: 15° to 32° C (59° to 90° F)
• Storage temperature: -30° to 70° C (-22° to 158° F)
Warranty
One-year limited hardware warranty
Visit hpsprocket.com for more information.
Regulatory Model Number
For regulatory identication purposes, your product is assigned a
Regulatory Model Number. The Regulatory Model Number for your
product is SNPRH-1603.
• Note: This regulatory number should not be confused with the marketing name
(HP Sprocket Photo Printer) or product numbers (X7N07A and X7N08A).
Specications
To Next Page
Loading...
