Step 3 - Other StoreVirtual Storage Options
Description
Two 6' Highline (IEC-IEC) power cord ships standard per 4130/4330 Node
NOTE:
HP StoreVirtual 4130/ 4330 Storage do not ship standard with NEMA power cords (P/N 163719-002) that allow connection to
110V US wall outlets in a home or office. HP StoreVirtual Storage is primarily connected to PDU's in data center racks so they ship
standard with only a PDU power cord (416151-B21).
If a user wishes to power HP StoreVirtual Storage using a 110V receptacle (NEMA-15), the NEMA power cord (AF556A) must be ordered
separately. If customers require a power cord, they can check the power cord matrix for the appropriate cord.
Please see the UPS and PDU cable matrix's on the Power Protection page under Power Cords that lists cable descriptions,
requirements, and specifications for UPS and PDU units at the new HP Power Cord Link @ HP.com. Use the following new link:
www.hp.com/products/powercords
NOTE:
Rack models ship standard with IEC cables.
Step 4 - Choose Supported Options For iSCSI Infrastructure
Select each required option with quantities specified. HP StoreVirtual Storage support servers with industry standard Gigabit and 10
Gigabit (SFP+) Ethernet components from various manufacturers that conform to IEEE 802.3 standards.
Description with Parts Shipped:
For details on standard Gigabit Ethernet components (including Gigabit Ethernet switches, Network Interface cards and Ethernet
cables) from HP
http://welcome.hp.com/country/us/en/prodserv/networking.html
For details on standard Fibre Channel components (including Fibre Channel switches, HBAs and Fibre cables) from HP
http://h18006.www1.hp.com/storage/networking/index.html
Step 5 - Choose Rack Options
Select each required option with quantities specified.
Rack Airflow
Requirements
HP Intelligent Series Racks
-
Intelligence - HP Intelligent Series rack-level enclosures with HP Location Discovery Services and HP
Power Discovery Services enable your servers to self-identify and inventory themselves. This
allows you to optimally place workloads while eliminating manual and error prone asset
management tasks.
Cooling - With an industry leading 81% open perforation area on the door, HP Intelligent Series Rack
enclosures deliver higher airflow, allowing cooling efficiency and sustainable power savings.
Convenience - Unmatched cable management in the back of the rack provides tool-less operations
and extra space for hot air to pass from the rack.
Structural Integrity - Up to 3,000 lbs of dynamic loading enables HP Intelligent Series Racks to be
configured, shipped and moved with all types of equipment.
CAUTION:
If a third-party rack is used, observe the following additional requirements to ensure adequate
airflow and to prevent damage to the equipment:
Front and rear doors: If your 42U server rack includes closing front and rear doors, you must allow 830
square inches (5,350 sq cm) of hole evenly distributed from top to bottom to permit adequate airflow
QuickSpecs
HP StoreVirtual 4000 Storage
Configuration Information
DA - 14437 Worldwide — Version 13 — December 9, 2013
Page 31
To Next Page
Loading...
