4.2 Installing SAS, SATA, or solid state drives
4.3 Installing the SFF flash adapter option
4.4 Installing the M.2 SSD flash drive and adapter board
4.5 Installing the controller option
4.6 Installing mezzanine card options
4.7 Installing the P416ie-m Controller mezzanine option
4.8 HPE Smart Storage Battery
4.9 HPE Smart Storage Hybrid Capacitor
4.9.1 Minimum firmware versions
4.9.2 Installing the energy pack option
4.10 Memory options
4.10.1 DIMM and NVDIMM population information
4.10.2 DIMM-processor compatibility
4.10.3 HPE SmartMemory speed information
4.10.4 Installing a DIMM
4.10.5 HPE 16GB NVDIMM option
4.10.5.1 Server requirements for NVDIMM support
4.10.5.2 Installing an NVDIMM
4.10.5.3 Configuring the compute module for NVDIMMs
4.10.5.4 NVDIMM sanitization
4.10.5.5 NVDIMM relocation guidelines
4.10.6 Intel Optane persistent memory 100 series for HPE
4.10.6.1 Persistent memory module-processor compatibility
4.10.6.2 Persistent memory module population information
4.10.6.3 System requirements for persistent memory module support
4.10.6.4 Installing persistent memory modules
4.10.6.5 Configuring the compute module for Intel Optane persistent memory 100 series for HPE
4.10.6.6 Persistent memory module relocation guidelines
4.10.6.7 Migrating a persistent memory module
4.11 Installing the processor heatsink option
4.12 HPE Trusted Platform Module 2.0 Gen10 option
4.12.1 Overview
4.12.2 HPE Trusted Platform Module 2.0 guidelines
4.12.3 Installing and enabling the HPE TPM 2.0 Gen10 option
4.12.3.1 Installing the Trusted Platform Module board
4.12.3.1.1 Preparing the compute module for installation
4.12.3.1.2 Installing the TPM board and cover
4.12.3.1.3 Preparing the compute module for operation
4.12.3.2 Enabling the Trusted Platform Module
4.12.3.2.1 Enabling the Trusted Platform Module as TPM 2.0
4.12.3.2.2 Enabling the Trusted Platform Module as TPM 1.2
4.12.3.3 Retaining the BitLocker recovery key/password
5 Cabling
5.1 Cabling resources
To Next Page
Loading...
