Configuring the Configuring the compute modulecompute module for NVDIMMs for NVDIMMs
After installing NVDIMMs, configure the compute module for NVDIMMs. For information on configuring settings for NVDIMMs, see the
HPE 16GB NVDIMM User Guide on the Hewlett Packard Enterprise website ( https://www.hpe.com/info/nvdimm-docshttps://www.hpe.com/info/nvdimm-docs).
The compute module can be configured for NVDIMMs using either of the following:
UEFI System Utilities—Use System Utilities through the Remote Console to configure the compute module for NVDIMM memory
options by pressing the F9 key during POST. For more information about UEFI System Utilities, see the Hewlett Packard Enterprise
website (https://www.hpe.com/info/uefi/docshttps://www.hpe.com/info/uefi/docs).
iLO RESTful API for HPE iLO 5—For more information about configuring the system for NVDIMMs, see
https://hewlettpackard.github.io/ilo-rest-api-docs/ilo5/https://hewlettpackard.github.io/ilo-rest-api-docs/ilo5/.
To Next Page
Loading...
