Product information
Table 1-1 Product information
Topic Location
HP Cool Tools Most HP Microsoft Windows workstations are
preloaded with additional software that is not
automatically installed during first boot.
Additionally, a number of valuable tools on your
workstation are preinstalled that may enhance
system performance. To access or learn more
about these applications, choose one of the
following options:
●
Click the HP Cool Tools icon on the
desktop, or
●
Open the HP Cool Tools folder by
selecting Start > All Programs > HP Cool
Tools.
To learn more about these applications, click
HP Cool Tools—Learn More.
To install or launch the applications, click the
appropriate application icon.
Regulatory information Refer to the Safety & Regulatory Information
guide on the Documentation and Diagnostics
CD for product Class information. You can also
refer to the label on the workstation chassis.
Accessories For complete and current information on
supported accessories and components, visit
http://www.hp.com/go/workstations.
System board A diagram of the system board is located on the
inside of the side access panel. Also, additional
information is located in the Maintenance and
Service Guide on the Web at
http://www.hp.com/support/
workstation_manuals/.
Serial number and Certificate
of Authenticity (COA) labels
(if applicable)
Serial number labels are on the top panel, or on
the side of the unit at the rear, depending on the
workstation model. The COA label is generally
located on the top or side panel near the serial
number label. Some workstations have this
label on the bottom of the unit.
Linux For information on running Linux on HP
workstations, visit
http://www.hp.com/linux/.
2 Chapter 1 Locating HP resources ENWW
To Next Page
Loading...
