Table 3-4 National keyboard delimiter characters
Language Delimiter Language Delimiter Language Delimiter
Arabic / Greek - Russian /
Belgian = Hebrew . Slovakian -
BHCSY* - Hungarian - Spanish -
Brazilian / Italian - Swedish/Finnish /
Chinese / Japanese / Swiss -
Czech - Korean / Taiwanese /
Danish - Latin American - Thai /
French ! Norwegian - Turkish .
French
Canadian
é Polish - U.K. English /
German - Portuguese - U.S. English /
NOTE: * For Bosnia-Herzegovina, Croatia, Slovenia, and Yugoslavia.
Clearing passwords
If you forget your password, you cannot access the workstation. See the section on resetting the
password jumper for instructions on clearing passwords.
DriveLock
WARNING! Enabling DriveLock can render a hard drive permanently inaccessible if the master
password is lost or forgotten. No method exists to recover the password or access the data.
DriveLock is an industry-standard security feature that prevents unauthorized access to the data on an
ATA hard drive. DriveLock has been implemented as an extension to Computer Setup. It is only available
when hard drives that support the ATA Security command set are detected.
DriveLock is intended for HP customers for whom data security is the paramount concern. For such
customers, the cost of the hard drive and the loss of the data stored on it is inconsequential when
compared with the damage that could result from unauthorized access to its contents.
In order to balance this level of security with the practical need to accommodate a forgotten password,
the HP implementation of DriveLock employs a two-password security scheme. One password is
intended to be set and used by a system administrator while the other is typically set and used by the
end-user. There is no "back-door" that can be used to unlock the drive if both passwords are lost.
Therefore, DriveLock is most safely used when the data contained on the hard drive is replicated on a
corporate information system or is regularly backed up. In the event that both DriveLock passwords are
lost, the hard drive is rendered unusable. For users who do not fit the previously defined customer profile,
this may be an unacceptable risk. For users who do fit the customer profile, it may be a tolerable risk
given the nature of the data stored on the hard drive.
DriveLock applications
The most practical use of the DriveLock security feature is in a corporate environment. The system
administrator would be responsible for configuring the hard drive which would involve, among other
things, setting the DriveLock master password and a temporary user password. In the event that the
user forgets the user password or the equipment is passed on to another employee, the master
password can always be used to reset the user password and regain access to the hard drive.
44 Chapter 3 System management ENWW
To Next Page
Loading...
