Sliding Rack Mount Kit Installation
Page 5 of 20
Installing on Round Hole and Square Hole Racks
NOTE: This product must be mounted in the middle of a 4U space. Use the mounting aid at the end of this
document to determine a 4U space and mark the center.
1. Engage the three pins on the rear slide mounting bracket in the holes in the rear rack column; slide
forward to lock in place 1.
2. Engage the three pins on the front slide mounting bracket in the holes in the front rack column; slide
rearward to lock in place 2.
NOTE: Slide telescopes to accomplish this.
Repeat this procedure for the second slide.
1
2
A
To Next Page
Loading...
