3. Pull up on the handle 1 and lift off the cover 2.
Figure 4-5 Opening the side access panel
To replace the side access panel, align the bottom groove of the side access panel with the bottom edge
of the chassis, rotate the side access panel toward the chassis and press firmly until the latch engages.
Front Bezel
1. Lift up on the two release snaps 1 located on the front bezel.
2. Rotate the front bezel away 2 from the chassis to remove the bezel.
Figure 4-6 Opening the front bezel
To replace the front bezel, align front bezel on the bottom and rotate in until it snaps into place.
64 Chapter 4 Removal and replacement procedures ENWW
To Next Page
Loading...
