●
Use the up or down arrow key to highlight 4. Exit, and press Enter.
●
Use the up or down arrow key to highlight 3. Reset Disks to Non-RAID, and press Enter.
5. Press the up and down arrow keys and <Space> to mark individual physical disks to be reset.
6. Press Enter to complete the selection.
7. When prompted, press Y to confirm the reset action.
8. Choose one of the following steps:
●
Return to step 1. to delete additional RAID volumes.
●
Refer to
Creating RAID volumes on page 140 to create RAID volumes.
●
Use the up or down arrow key to highlight 4. Exit, and press Enter.
ENWW Deleting RAID volumes 141
To Next Page
Loading...
