Power connections to system components
For help with identifying power cables, see the following figure and table. Ensure that all cables are
routed or tied so they cannot interfere with the processor heatsink fans.
Figure 4-21 Identifying the workstation power connectors for a typical configuration
Table 4-5 Workstation power connector description
Item Description Item Description
A Power supply I Optical drive
B Main power J Optical drive
C Memory power K Diskette drive
D Processor power L Hard drive
E PCI Express auxiliary power M Hard drive
F PCI Express auxiliary power N Hard drive
G Memory riser* O Hard drive
H Optical drive P Hard drive
* This connector is included only on workstations with the 1050-watt power supply.
System and memory fan assembly
This section describes how to remove the system and memory fan assembly.
ENWW Removing and replacing components 71
To Next Page
Loading...
