Memory riser DIMM installation order
DIMMs can be added to memory risers on the HP xw8600 Workstation in this manner:
●
DIMMS must be added in pairs, in the order shown in the figure below.
Figure 4-33 Memory riser DIMM installation order
●
Each pair must be matched in rank, DRAM technology, speed, and capacity.
TIP: For best performance, load the largest capacity DIMM pairs closest to the system board.
Installing a memory riser assembly and DIMMs
The following steps describe how to install memory riser DIMMs and a memory riser assembly.
CAUTION: To use a memory riser assembly, your workstation must be equipped with a 1050W power
supply and two high performance processor heatsinks.
80 Chapter 4 Removal and replacement procedures ENWW
To Next Page
Loading...
