Step 6—Reassembling the workstation
1. Reinstall the workstation card support, if applicable.
2. Reinstall the side access panel.
3. Reconnect power to the workstation and all external devices.
4. Restore power to the workstation and all external devices.
Step 7—Configuring the software
For instructions on loading and setting up the graphics drivers, see the manufacturer’s documentation
shipped with the NVIDIA Quadro graphics card.
At the time of component installation, look for device firmware and driver updates, designated for your
workstation model and operating system from
http://www.hp.com/go/workstationsupport.
Japanese 日本語
This document is available in Japanese. See http://www.hp.com/support/workstation_manuals, then
select your workstation product and select Japanese from the drop down Manual Language menu.
このドキュメントは日本語版が用意されています。
http://www.hp.com/support/workstation_manuals
にアクセスし、ご使用のワークステーション製品を選択し、Manual Language ドロップダウン メニ
ューから Japanese を選択してください。
8 NVIDIA Quadro FX5800 Graphics Card installation ENWW
To Previous Page
Loading...
