FEMP Standby Power Compliant @115V
(<2W in S5 - Power Off)
Yes Yes
EuP Compliant @ 230V
(<0.5 W in S5 - Power Off)
Yes Yes
CECP Compliant @ 220V
(<4W in S3 - Suspend to RAM)
Yes; Configuration dependent Yes; Configuration dependent
Power Consumption in sleep mode
(as defined by ENERGY STAR) - Suspend to RAM (S3)
(Instantly Available PC)
<15W <35W
Built-in Self Test LED
Yes Yes
Surge Tolerant Full Ranging Power Supply
(withstands power surges up to 2000V)
Yes Yes
*Input voltage restriction
NOTE:
The 1125W power supply can also supply 1275W of output power when the input voltage is
greater than 105V. If the input voltage is less than 105V, but greater than 90V for any reason, the
maximum power that can be drawn is 1125W. An uninterruptible power supply (UPS) is highly
recommended if 1275W output power is desired.
The 1125W Power Supply can also supply 1450W of output power when the input voltage is greater
than 180V under all conditions.
AUX IN (audio)
No
Clear CMOS Button
Yes
Multibay Header
No
Integrated Gigabit Ethernet
Yes, dual port.
Access Panel Solenoid Lock
Header
No
Access Panel Intrusion Sensor
Header
Yes, as part of Front UI (Control Panel) cable header
Memory Fan Connector
Yes, blind-mate
System Configuration
QuickSpecs
HP Z820 Workstation
System Technical Specifications
DA - 14264 North America — Version 36 — December 1, 2013
Page 22
To Next Page
Loading...
