Table 2-3 Display components and their descriptions
Component Description
(1) WWAN antennas (select products only)*[cad edit-
keyboard deck antenna going away]
Send and receive wireless signals to communicate with wireless wide
area networks (WWANs).
(2) WLAN antennas (select products only)* Send and receive wireless signals to communicate with wireless local
area networks (WLANs).
(3) Camera light(s) (select products only) On: One or more cameras are in use.
(4) Ambient light sensor Adjusts the brightness of the display, depending on the ambient light.
(5) Internal microphones (select products only) Record sound.
(6) Camera privacy cover (select products only) By default, the camera lens is uncovered, but you can slide the camera
privacy cover to block the camera's view. To use the camera, slide the
camera privacy cover in the opposite direction to reveal the lens.
NOTE: If you have both front-facing and rear-facing cameras, when
one camera lens is revealed and ready to use, the other is concealed.
(7) Camera(s) (select products only) Allow(s) you to video chat, record video, and record still images. Some
cameras also allow a facial recognition logon to Windows, instead of a
password logon.
NOTE: Camera functions vary depending on the camera hardware
and software installed on your product.
*The antennas are not visible from the outside of the computer. For optimal transmission, keep the areas immediately around the
antennas free from obstructions.
For wireless regulatory notices, see the section of the Regulatory, Safety, and Environmental Notices that applies to your country or region.
To access this guide:
▲ Type HP Documentation in the taskbar search box, and then select HP Documentation.
8 Chapter 2 Components ENWW
To Next Page
Loading...
