1.
2.
HP Quick Release 2
Ultra convenient set up. Easily mount and detach the display head from the
stand. The new HP Quick Release 2 is flush with rear of the display head for a
clean appearance. (
NOTE:
Not compatible with HP Quick Release Kit
).
VESA External Mounting
User can VESA mount the display in two ways:
Use the 100x100mm VESA mount holes that are in the QR2 recess.
Remove the QR2 mount plate from the stand and mount the plate to the
VESA arm. Then the ZR2440w head connects to the QR2 mount plate and
the quick release function is retained.
Cable Management
Enhanced cable management for easy concealment of power, video and USB
cables. Effortless routing of cables through the base of the column with
removable cover plate.
Detachable Stand
Stand ships detached and easily attaches with new HP Quick Release 2
mechanism.
Tilt Range
-5° to +35°
Swivel Range
Yes (+/- 45°)
Height Adjustable
Yes (10 cm)
Pivot Rotation
Yes
Environmental
Temperature - Operating
5° to 35° C
(41° to 95° F)
Temperature - Non-
operating
-20° to 60° C
(-4° to 140° F)
Humidity - Operating
20% to 80% non-condensing
Humidity - Non-operating
5% to 95%, 38.7° C max wet-bulb
Altitude - Operating
0 to 5,000 m
(16,404 ft)
Altitude - Non-operating
0 to 12,192 m
(0 to 40,000 ft)
White LED Backlight
Yes
Arsenic-Free Glass
3
Yes
BFR/PVC Free
4
Yes, except cables
Mercury Free
Yes
Environmental Data
Eco-Label Certifications
& declarations
This product has received or is in the process of being certified to the following
approvals and may be labeled with one or more of these marks:
US ENERGY STAR®
IT ECO declaration
EPEAT® Gold
2
where HP registers commercial desktop products. See
http://www.epeat.net
for registration status in your country.
Energy Consumption
(in accordance with US
Energy Star test method)
115VAC, 60Hz 230VAC, 50Hz 100VAC, 60Hz
Normal Operation
24.43 W 24.34 W 25.58 W
Sleep
0.36 W 0.42 W 0.35 W
Off
0.34 W
0.4 W 0.4 W
QuickSpecs
HP ZR2440w 24-inch LED Backlit IPS Monitor
Technical Specifications
DA - 14145 North America — Version 5 — July 18, 2013
Page 4
To Next Page
Loading...
