Blitz
™
No. 1200CMB
11
The correct cutter to be used is printed on each card. One of the important
features of this machine is its ability to maintain correct depths and spaces
with virtually no set-up time involved, even when changing cutters. This
feature is reliant upon using cutters whose outside diameters are matched
and equal.
addItIonal cutters for the blItz
™
machIne
(contInued)
No. CW-1014 (Tool Steel)
This specially designed cutter has .080 flat for
one step cutting of keys for Kwikset, Weslock,
and Weiser locks using original pins.
No. CW-20FM (Tool Steel)
76°, double angle, flat mill tooth for
Sargent and Welch keys.
No. CW-32MC (Tool Steel)
Specially designed 90° angle, tool steel cutter
for ASSA keys with .032 flat.
No. CW-47MC (Tool Steel)
No. CW-47MCC (Carbide)-Optional
87° angle, tool steel cutter for some automotive keys.
Included with the Extreme Blitz™(No. 1200CMBX)
To Next Page
Loading...
