HPE Cloudline CL3100 Gen10 - Page 144

Software and configuration utilities 144
Socket 0 PcieBr2D00F0 – Port 2A screen
To access this screen from the Main screen, choose Socket Configuration > IIO Configuration > IIO0
Configuration > Socket 0 PcieBr2D00F0 – Port 2A.
Setup Item
Options
Help Text
Comments
PCI-E Port
Auto
Disable
Enable
In auto mode the BIOS will
remove the EXP port if there is
no device or errors on that
device and the device is not HP
capable. Disable is used to
disable the port and hide its CFG
space.
Link Speed
Auto
Gen 1 (2.5 GT/s)
Gen 2 (5 GT/s)
Gen 3 (8 GT/s)
Choose Link Speed for this PCIe
port.
This item will be displayed if
“PCI-E Port” is Enabled.
PCI-E Port Link Status
Information only.
PCI-E Port Link Max
Information only.
PCI-E Port Link Speed
Information only.