Depending on the installed options and the regional location where the server was purchased, the server can be configured with one of the
following power supplies. For detailed power supply specifications, see the QuickSpecs on the Hewlett Packard EnterpriseHewlett Packard Enterprise website website.
SubtopicsSubtopics
HPE 500 W Flex Slot Platinum Hot-plug Low Halogen Power SupplyHPE 500 W Flex Slot Platinum Hot-plug Low Halogen Power Supply
HPE 800 W Flex Slot Platinum Hot-plug Low Halogen Power SupplyHPE 800 W Flex Slot Platinum Hot-plug Low Halogen Power Supply
HPE 1000 W Flex Slot Titanium Hot-plug Power SupplyHPE 1000 W Flex Slot Titanium Hot-plug Power Supply
HPE 1600 W Flex Slot -48 VDC Hot-plug Power SupplyHPE 1600 W Flex Slot -48 VDC Hot-plug Power Supply
HPEHPE 500 W Flex Slot Platinum Hot-plug Low Halogen Power Supply 500 W Flex Slot Platinum Hot-plug Low Halogen Power Supply
SpecificationSpecification ValueValue
Input requirementsInput requirements —
Rated input voltage 100 VAC to 240 VAC
240 VDC for China only
Rated input frequency 50 Hz to 60 Hz
Not applicable to 240 VDC
Rated input current 5.8 A at 100 VAC
2.8 A at 200 VAC
2.4 A at 240 VDC for China only
Maximum rated input power 580 W at 100 VAC
560 W at 200 VAC
558 W at 240 VDC for China only
BTUs per hour 1999 at 100 VAC
1912 at 200 VAC
1904 at 240 VDC for China only
Power supply outputPower supply output —
Rated steady-state power 500 W at 100 VAC to 127 VAC input
500 W at 100 VAC to 240 VAC input
500 W at 240 VDC input for China only
Maximum peak power 500 W at 100 VAC to 127 VAC input
500 W at 100 VAC to 240 VAC input
500 W at 240 VDC input for China only
HPEHPE 800 W Flex Slot Platinum Hot-plug Low Halogen Power Supply 800 W Flex Slot Platinum Hot-plug Low Halogen Power Supply
To Next Page
Loading...
