a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
4. Disconnect all peripheral cables from the server.
5. Remove the server from the rack .
6. Place the server on a flat, level work surface.
7. Remove the access panel .
8. Remove the middle cover .
9. Remove the fans.
10. Remove the fan wall.
11. Remove the front energy pack retention latch:
a. Pull up and hold the latch (callout 1).
b. Push the latch to detach from the chassis (callout 2).
Removing and replacing the front bezelRemoving and replacing the front bezel
ProcedureProcedure
1. If installed, remove the Kensington security lock.
For more information, see the lock documentation.
To Next Page
Loading...
