ResultsResults
To replace the component, reverse the removal procedure.
Removing and replacing the M.2 air baffleRemoving and replacing the M.2 air baffle
About this taskAbout this task
ProcedureProcedure
1. Power down the server.
2. If installed, open the cable management arm .
3. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
4. Disconnect all peripheral cables from the server.
5. Remove the server from the rack .
6. Place the server on a flat, level work surface.
7. Remove the access panel .
8. Remove the M.2 air baffle.
To Next Page
Loading...
