a. When using a torque wrench to tighten the heatsink screws, set a torque between 1.24 N-m (11 lbf-in) to 1.47 N-m (13 lbf-in) .
b. Note the Front of serverFront of server text on the heatsink label to correctly orient the heatsink over the processor socket.
c. Position the heatsink on top of the processor, ensuring that it is properly seated before securing the screws.
d. Tighten the heatsink screw numbers 1 and 2 (callouts 1 and 2).
e. Tighten the heatsink screw numbers 3, 4, 5, and 6 in a diagonal manner (callouts 3 to 6).
To Next Page
Loading...
