HPE ProLiant DL325 Gen11 - Results; Riser board replacement; Removing and replacing the one-slot PCIe5 x16 riser board; Prerequisites

10. If installed, remove the expansion card .
11. Remove the one–slot PCIe5 x16 riser board .
ResultsResults
To replace the component, reverse the removal procedure.
Riser board replacementRiser board replacement
SubtopicsSubtopics
Removing and replacing the one-slot PCIe5 x16 riser boardRemoving and replacing the one-slot PCIe5 x16 riser board
Removing and replacing the secondary low-profile one-slot PCIe5 x16 riser boardRemoving and replacing the secondary low-profile one-slot PCIe5 x16 riser board
Removing and replacing the one-slot PCIe5 x16 riser boardRemoving and replacing the one-slot PCIe5 x16 riser board
PrerequisitesPrerequisites
Before you perform this procedure, make sure that you have a T-15 Torx screwdriver available.
About this taskAbout this task
HPE ProLiant DL325 Gen11 Server Maintenance and Service Guide 174