HPE ProLiant DL325 Gen11 - Results; Removing and replacing the serial port; Prerequisites; About this task

11. Remove the left OCP Slot 21 rail.
Retain all screws. These screws will be used to secure the new left OCP Slot 21 rail spare.
ResultsResults
To replace the component, reverse the removal procedure.
Removing and replacing the serial portRemoving and replacing the serial port
PrerequisitesPrerequisites
Before you perform this procedure, make sure that you have a hex screwdriver available.
About this taskAbout this task
HPE ProLiant DL325 Gen11 Server Maintenance and Service Guide 200