To manage the hot-plug SAS drive, install the HPE MR type-o Gen11 storage controller (OROC).
SFF drive bay numberingSFF drive bay numbering
The following drive backplane options are supported in all SFF drive configurations:
2 SFF side-by-side drive backplanes:
2 SFF 16G x4 U.2 NVMe/SAS UBM4 BC
2 SFF 24G x4 U.3 NVMe/SAS UBM3 BC
2 SFF 24G x4 U.3 NVMe/SAS UBM6 BC
8 SFF drive backplanes:
8 SFF 16G x4 U.2 NVMe/SAS UBM4 BC
8 SFF 24G x1 U.3 NVMe/SAS UBM3 BC
8 SFF 24G x4 U.3 NVMe/SAS UBM3 BC
8 SFF 24G x1 U.3 NVMe/SAS UBM6 BC
8 SFF 24G x4 U.3 NVMe/SAS UBM6 BC
For more information on the drive backplane description, see Drive backplane naming.
ItemItem DescriptionDescription
1 Box 1, bays 1–8
2 Box 2, bays 1 and 2
In the SFF drive configuration:
Drives are assigned to box 1 and optional box 2.
SAS, SATA, or U.3 NVMe drives are supported.
To manage the hot-plug SAS drive, install one of following storage controller:
HPE SR/MR type-p Gen11 storage controller
HPE MR type-o Gen11 storage controller (OROC)
When installing NVMe drives, install either all U.2 or all U.3 drives. Mixed NVMe drive type installation in the same box is not supported.
E3.S E3.S drive bay numberingdrive bay numbering
The 20 E3.S x4 NVMe UBM5 EC1 drive backplane option is supported in the E3.S drive configuration.
For more information on the drive backplane description, see Drive backplane naming.
To Next Page
Loading...
