CAUTION:CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all bays are populated with
either a component or a blank.
CAUTION:CAUTION:
A discharge of static electricity from a finger or other conductor might damage system boards or other static-sensitive
devices. To prevent damage, observe antistatic precautions.
ProcedureProcedure
1. Back up all server data.
2. If installed, remove the front bezel .
3. Observe the drive LED status and determine if the drive can be removed.
4. Remove the drive.
LFF drive
SFF drive
ResultsResults
To replace the component, reverse the removal procedure.
Removing and replacing a hot-plug E3.S driveRemoving and replacing a hot-plug E3.S drive
About this taskAbout this task
CAUTION:CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all bays are populated with
either a component or a blank.
To Next Page
Loading...
