HPE ProLiant DL325 Gen11 - Results; Removing and replacing the optical drive bay blank; Prerequisites; About this task

SFF drive blank
E3.S drive blank
ResultsResults
To replace the component, reverse the removal procedure.
Removing and replacing the optical drive bay blankRemoving and replacing the optical drive bay blank
PrerequisitesPrerequisites
Before you perform this procedure, make sure that you have a spudger or any small prying tool available.
About this taskAbout this task
CAUTION:CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all bays are populated with
either a component or a blank.
HPE ProLiant DL325 Gen11 Server Maintenance and Service Guide 69