Front panel LEDs and buttons
LFF drive model
Item Description Status
1 UID button/LED
Solid blue = Activated
Flashing blue:
• 1 flash per second = Remote management or
firmware upgrade in progress
• 4 flashes per second = iLO manual reboot
sequence initiated
• 8 flashes per second = iLO manual reboot
sequence in progress
Off = Deactivated
2 NIC status LED
Solid green = Link to network
Flashing green (1 flash per second) = Network
active
Off = No network activity
3 Health LED
Solid green = Normal
Flashing green (1 flash per second) = iLO is
rebooting
Flashing amber = System degraded
1
Flashing red (1 flash per second) = System critical
1
4 Power On/Standby button and
system power LED
Solid green = System on
Flashing green (1 flash per second) = Performing
power on sequence
Solid amber = System in standby
Off = No power present
2
1
If the health LED indicates a degraded or critical state, review the system Integrated Management Log (IML) or use
HPE iLO to review the system health status.
98 Component identification
To Next Page
Loading...
