HPE ProLiant DL345 Gen11 - Results; Removing and replacing the LFF universal media bay DisplayPort cable; Prerequisites; Procedure

ResultsResults
To replace the component, reverse the removal procedure.
Removing and replacing the LFF universal media bay DisplayPort cableRemoving and replacing the LFF universal media bay DisplayPort cable
PrerequisitesPrerequisites
Before you perform this procedure, make sure that you have a T-10 Torx screwdriver available.
ProcedureProcedure
1. If installed, remove the front bezel .
2. Power down the server.
3. If installed, open the cable management arm.
HPE ProLiant DL345 Gen11 Server Service and Maintenance Guide 112