a. Pull and hold the release tab (callout 1).
b. Slide the rail towards the front panel and pull it away from the server (callout 2).
12. Remove the left OCP Slot 21 rail.
Retain all screws. These screws will be used to secure the new left OCP Slot 21 rail spare.
ResultsResults
To replace the component, reverse the removal procedure.
Riser board replacementRiser board replacement
SubtopicsSubtopics
Removing and replacing the PCIe5 x16 base riser from one-slot riser cageRemoving and replacing the PCIe5 x16 base riser from one-slot riser cage
To Next Page
Loading...
