PrerequisitesPrerequisites
Before you perform this procedure, review the:
Rack warnings and cautions
Server warnings and cautions
About this taskAbout this task
WARNING:WARNING: To reduce the risk of personal injury or equipment damage, be sure that the rack is adequately stabilized before
extending anything from the rack.
ProcedureProcedure
1. Power down the server.
2. Release the cable management arm .
3. Disconnect the cabling from the rear panel.
4. Extend the server from the rack .
5. Remove the server from the rack:
6. Place the server on a sturdy, level surface.
Remove the access panelRemove the access panel
About this taskAbout this task
WARNING:WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the internal system components to
cool before touching them.
CAUTION:CAUTION: Do not operate the server for long periods with the access panel open or removed. Operating the server in this
manner results in improper airflow and improper cooling that can lead to thermal damage.
To Next Page
Loading...
