HPE ProLiant DL360 Gen11 - Results; Removing and replacing a riser cage; About this task

2. Remove the access panel .
3. Remove the fan.
IMPORTANT:IMPORTANT: When a hot-plug fan is removed, the other fans in the server will increase speed to compensate.
CAUTION:CAUTION: To avoid server shutdown, a fan must be replaced within 60 seconds of being removed.
ResultsResults
To replace the component, reverse the removal procedure.
Removing and replacing a riser cageRemoving and replacing a riser cage
About this taskAbout this task
HPE ProLiant DL360 Gen11 Server Maintenance and Service Guide 66