10. Remove the tertiary riser cage .
11. Remove the expansion card .
12. Remove the risers from the tertiary riser cage.
13. Detach the free-height riser and the stacking riser.
ResultsResults
To replace the component, reverse the removal procedure.
Removing and replacing the GPU riserRemoving and replacing the GPU riser
PrerequisitesPrerequisites
Before you perform this procedure, make sure that you have a T-15 Torx screwdriver available.
About this taskAbout this task
CAUTION:CAUTION:
A discharge of static electricity from a finger or other conductor might damage system boards or other static-sensitive
devices. To prevent damage, observe antistatic precautions.
To Next Page
Loading...
