Disconnect all front GPU riser cables from the system board.
11. Remove the front GPU cage .
12. If installed, remove the GPU.
13. Remove the GPU riser from the riser cage.
Retain all screws. These screws will be used to install the new spare GPU risers.
14. Disconnect the power cable from the riser.
ResultsResults
To replace the component, reverse the removal procedure.
Optical drive replacementOptical drive replacement
SubtopicsSubtopics
Removing and replacing the optical drive from the LFF chassisRemoving and replacing the optical drive from the LFF chassis
Removing and replacing the optical drive from the SFF chassisRemoving and replacing the optical drive from the SFF chassis
Removing and replacing the optical drive from the LFF chassisRemoving and replacing the optical drive from the LFF chassis
PrerequisitesPrerequisites
Before you perform this procedure, make sure that you have the following items available:
T-10 Torx screwdriver
Phillips No. 1 screwdriver
ProcedureProcedure
1. Power down the server.
2. If installed, open the cable management arm.
To Next Page
Loading...
