HPE ProLiant DL385 Gen11 - 24 E3.S drive configuration; 36 E3.S drive configuration

ItemItem DescriptionDescription
1 Serial number/iLO information pull tab
2 SFF drives
3 iLO service port
4 USB 3.2 Gen 1 port
The serial number/iLO information pull tab is double-sided. One side shows the server serial number and the customer asset tag label.
The other side shows the default iLO account information.
Depending on the type of drive backplane installed , the server supports SFF SAS, SATA, or U.3 NVMe drives.
24 24 E3.SE3.S drive configuration drive configuration
ItemItem DescriptionDescription
1 Serial number/iLO information pull tab
2 E3.S drives
3 iLO service port
4 USB 3.2 Gen 1 port
The serial number/iLO information pull tab is double-sided. One side shows the server serial number and the customer asset tag label.
The other side shows the default iLO account information.
36 36 E3.SE3.S drive configuration drive configuration
This drive configuration supports a x2 connection.
1
2
1
2
1
1
HPE ProLiant DL385 Gen11 Server Maintenance and Service Guide 273