NOTE: Image may dier from actual product.
7. Remove the shipping cap from the auxiliary cable.
8. Connect the auxiliary cable to the iLO Sideband ALOM Module:
a. Align the connector keying posts to the ALOM module.
b. Secure the auxiliary cable to the ALOM module with a Phillips screwdriver.
CAUTION: Do not over torque the screw.
NOTE: Be sure not to twist the cable.
9.
Remove the PCIe blank from the riser cage.
NOTE: Image may
dier from actual product.
10. Install the SFP28 card into the slot:
Hardware options installation
128
To Next Page
Loading...
