DIMM slot locations
DIMM slots are numbered sequentially (1 through 12) for each processor on the system and mezzanine boards.
For specific DIMM population information, see the DIMM population guidelines on the Hewlett Packard Enterprise website
(http://www.hpe.com/docs/memory-population-rules).
System board DIMM slots
Processor mezzanine board DIMM slots
DIMM label identification
To determine DIMM characteristics, see the label attached to the DIMM. The information in this section helps you to use the
label to locate specific information about the DIMM.
Component identification
125
To Next Page
Loading...
