3. After performing the installation or maintenance procedure, slide the server back into the rack, and then press the server
firmly into the rack to secure it in place.
WARNING: To reduce the risk of personal injury, be careful when pressing the server rail-release latches and sliding
the server into the rack. The sliding rails could pinch your fingers.
Removing the server from the rack
To remove the server from a Hewlett Packard Enterprise, Compaq-branded, Telco, or third-party rack:
Procedure
1.
Power down the server.
2.
Extend the server from the rack (Extend the server from the rack).
3.
Disconnect the cabling and remove the server from the rack.
For more information, see the documentation that ships with the rack mounting option.
4.
Place the server on a sturdy, level surface.
Accessing the Systems Insight Display
Procedure
1. Press and release the panel.
2. After the display fully ejects, rotate the display to view the LEDs.
Removal and replacement procedures
43
To Next Page
Loading...
