10. If removed, do the following:
a. Install the air baffle (Installing the air baffle on page 58).
b. Install the processor mezzanine tray (Installing a processor mezzanine tray on page 129).
c. Install the CPU Mezzanine UPI performance kit (Installing a CPU Mezzanine UPI performance kit
on page 130).
11. Install the fan cage.
12. Install the access panel (Installing the access panel on page 56).
13. Install the server into the rack (Installing the server into the rack on page 48).
14. Connect each power cord to the server.
15. Connect each power cord to the power source.
16. Power up the server on page 53.
Installing a universal media bay
Prerequisites
Before you perform this procedure, make sure that you have the following items available:
• The components included with the hardware option kit
• T-10 Torx screwdriver
Procedure
1. Powering down the server on page 53.
2. Remove all power:
Installing hardware options 67
To Next Page
Loading...
