Systems Insight Display LED
and color
Health LED System power
LED
Status
Power supply (amber) Amber Green One or more of the following conditions
may exist:
• Redundant power supply is installed and
only one power supply is functional.
• AC power cord is not plugged into
redundant power supply.
• Redundant power supply fault
• Power supply mismatch at POST or
power supply mismatch through hot-
plug addition
Power cap
(o) — Amber Standby
Power cap (green) — Flashing green Waiting for power
Power cap (green) — Green Power is available.
Power cap (flashing amber) — Amber Power is not available.
IMPORTANT: If more than one DIMM slot LED is illuminated, further troubleshooting is required. Test each bank of
DIMMs by removing all other DIMMs. Isolate the failed DIMM by replacing each DIMM in a bank with a known
working DIMM.
Rear panel components
Item
Description
1 Slot 1 PCIe3
2 Slot 2 PCIe3
3 Slot 3 PCIe3 (optional - requires second processor)
4 Power supply 2 (PS2)
5 Power supply 1 (PS1)
6 Video port
7 NIC ports (if equipped)
8 iLO Management Port
Table Continued
14 Component identification
To Next Page
Loading...
