HPE ProLiant DX360 Gen10 - Power supply specifications

Specification Value
SFF maximum (10 drives, two
processors, two power supplies, two
heatsinks, one Smart Array
controller, seven fans)
1627 kg (3586 lb)
LFF minimum (one drive, one
processor, one power supply, two
heatsinks, one Smart Array
controller, five fans)
1377 kg (3036 lb)
LFF maximum (Four drives, two
processors, two power supplies, two
heatsinks, one Smart Array
controller, seven fans)
1678 kg (37 lb)
Power supply specifications
Depending on the installed options and the regional location where the server was purchased, the server can be
configured with one of the following power supplies:
•
HPE 500W Flex Slot Platinum Hot-plug Low Halogen Power Supply on page 168
•
HPE 800W Flex Slot Platinum Hot-plug Low Halogen Power Supply on page 169
• HPE 800W Flex Slot Titanium Hot-plug Low Halogen Power Supply on page 170
•
HPE 800W Flex Slot Universal Hot-plug Low Halogen Power Supply on page 171
• HPE 800W Flex Slot -48VDC Hot-plug Low Halogen Power Supply on page 172
• HPE 1600W Flex Slot Platinum Hot-plug Low Halogen Power Supply on page 173
For detailed power supply specifications, see the QuickSpecs on the Hewlett Packard Enterprise website (
http://
www.hpe.com/info/proliant/powersupply).
HPE 500W Flex Slot Platinum Hot-plug Low Halogen Power Supply
Specification
Value
Input requirements
—
Rated input voltage
100 VAC to 240 VAC
240 VDC for China only
Rated input frequency
50 Hz to 60 Hz
Not applicable to 240 VDC
Table Continued
168 Specifications