Universal media bay options
Installing a 2 SFF SAS/SATA drive cage
Prerequisites
Universal media bay options are compatible only with the 8SFF chassis.
Hewlett Packard Enterprise recommends installing the P816i-a controller to support 10 SAS/SATA drives. For more
information, see Installing an HPE Smart Array P816i-a SR Gen10 Controller option on page 107.
In addition, be sure that you have the following:
• The components included with the hardware option kit
• T-10 Torx screwdriver
• Additional cables, as needed. For more information, see SFF cables on page 142.
• 2 SFF SAS or SATA drives or blanks
For more information, contact a Hewlett Packard Enterprise authorized reseller.
Procedure
1. Back up all server data.
2.
Power down the server on page 31.
3. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
4. Do one of the following:
68 Hardware options installation
To Next Page
Loading...
