For more information, see the maintenance and service guide on the Hewlett Packard Enterprise
website.
2. If the issue persists, contact Hewlett Packard Enterprise support.
For more information, see "Accessing Hewlett Packard Enterprise support."
295-DIMM Failure – Memory Board X, DIMM Y
Symptom
295-DIMM Failure – Uncorrectable Memory Error – Memory Board X, DIMM Y. This memory will not be
available to the operating system. Action: Replace the failed DIMM to restore the full amount of memory.
Cause
A DIMM has failed.
Action
Replace the DIMM to restore the full amount of memory. For more information, see the maintenance and
service guide on the Hewlett Packard Enterprise website.
295-DIMM Failure – Processor X, DIMM Y
Symptom
295-DIMM Failure – Uncorrectable Memory Error – Processor X, DIMM Y. This memory will not be available
to the operating system. Action: Replace the failed DIMM to restore the full amount of memory.
Cause
A DIMM has failed.
Action
Replace the DIMM to restore the full amount of memory. For more information, see the maintenance and
service guide on the Hewlett Packard Enterprise website.
296-DIMM Configuration Error – Processor X, DIMM Y
Symptom
296-DIMM Configuration Error – Processor X, DIMM Y – Non-production DIMM detected. Action: Remove
non-production DIMM.
– System halted!
Cause
A non-production DIMM has been installed.
Action
1. Remove the non-production DIMM.
For more information, see the maintenance and service guide on the Hewlett Packard Enterprise
website.
2. Install a supported DIMM.
68 295-DIMM Failure – Memory Board X, DIMM Y
To Next Page
Loading...
