HPE ProLiant ML350 Gen10 - Removing and Replacing an LFF Hot-Plug Drive; Removing and Replacing an SFF Hot-Plug Drive

To replace the component, reverse the removal procedure.
Removing and replacing an LFF hot-plug drive
CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all
bays are populated with either a component or a blank.
Procedure
1. Back up all server data on the drive.
2. Open the front bezel on page 39.
3. Determine the status of the drive from the drive LED definitions.
4. Remove the drive.
To replace the component, reverse the removal procedure.
Removing and replacing an SFF hot-plug drive
CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all
bays are populated with either a component or a blank.
Procedure
1. Back up all server data on the drive.
2. Open the front bezel on page 39.
3. Determine the status of the drive from the drive LED definitions.
4. Remove the drive.
To replace the component, reverse the removal procedure.
Removal and replacement procedures 51